| |
|
|
 |
|
|
|
 |
|
| |
 |
|
Adjustable Motor Support |
Adjustable Motor Support
SKU: 552100
The adjustable motor support has a universal design and comes with both the bolt on bracket and the over the roller bracket. |
|
|
| |
 |
|
Adjustable Transom Saver |
Adjustable Transom Saver
SKU: 551900
The transom saver adjusts from 28 in. to 59 in. to reach where others won’t on hard to access trailer crossbars, that extend under the boat. |
|
|
| |
 |
|
Auxiliary Motor Steering Kit - Zinc |
Auxiliary Motor Steering Kit - Zinc
SKU: 552400
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. |
|
|
| |
 |
|
Auxiliary Motor Steering Kit -Stainles |
Auxiliary Motor Steering Kit -Stainless Steel
SKU: 552600
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. |
|
|
| |
 |
|
Battery Gauge -Hand Held Portable |
Battery Gauge -Hand Held Portable
SKU: 556000
The Panther hand held battery gauge allows you to determine the exact amount of charge remaining in your batteries. |
|
|
| |
 |
|
Battery Gauge For Round Panel Mounting |
Battery Gauge For Round Panel Mounting
SKU: 556100
The Panther battery gauge allows you to determine the exact amount of charge remaining in your batteries. Designed for permanent mounting. |
|
|
| |
 |
|
Battery Gauge Panel for Four Batteries |
Battery Gauge Panel for Four Batteries
SKU: 556400
The Panther battery gauge allows you to determine the exact amount of charge remaining in your batteries. Designed for panel mounting the battery gauge allows you to monitor four batteries with the simple touch of a switch. |
|
|
| |
 |
|
Battery Gauge Panel for Two Batteries |
Battery Gauge Panel for Two Batteries
SKU: 556200
The Panther battery gauge allows you to determine the exact amount of charge remaining in your batteries. Designed for panel mounting the battery gauge allows you to monitor two batteries with the simple touch of a switch. |
|
|
| |
 |
|
Bolt Packs - 2 1/2 in. |
Bolt Packs - 2 1/2 in.
SKU: 559020
This high quality stainless 2 1/2" bolt pack contains four bolts, four washers, and four Nyloc nuts. |
|
|
| |
 |
|
Bolt Packs - 3 1/2 in. |
Bolt Packs - 3 1/2 in.
SKU: 559030
This high quality stainless 3 1/2" bolt pack contains four bolts, four washers, and four Nyloc nuts. |
|
|
| |
 |
|
Bolt Packs - 4 1/2 in. |
Bolt Packs - 4 1/2 in.
SKU: 559040
This high quality stainless 4 1/2" bolt pack contains four bolts, four washers, and four Nyloc nuts. Course threads provide fast and secure attachment of any outboard to any boat. |
|
|
| |
 |
|
Bolt Packs - 6 1/2 in. |
Bolt Packs - 6 1/2 in.
SKU: 559060
This high quality stainless 6 1/2" bolt pack contains four bolts, four washers, and four Nyloc nuts. |
|
|
| |
 |
|
Dual Action Jackplate Model 300 |
Jackplate Dual Action Model 300
SKU: 550300
Bass, Walleye, Flats, and Ski performance boat owners need a Dual Action Jack Lift. Reasons why: better hole shot, higher top-end speeds, improved handling, shallow water running, keeping the bow down while getting on plane, and a lower outboard positio |
|
|
| |
 |
|
Fixed Outboard Motor Bracket 55-0027 |
Fixed Outboard Motor Bracket 55-0027
SKU: 550027
NEW! Heavy duty aluminum bracket with height adjustment is designed to hold 2 and 4 stroke motors weighing up to 150lbs. |
|
|
| |
 |
|
Integral Trim and Tilt Model 25 |
Integral Trim and Tilt Model 25
SKU: 550025
The Integral Trim and Tilt Model 25 is made to provide trim and tilt features on motors that don't have factory trim and tilt. |
|
|
| |
 |
|
Jackplate Model 450 |
Jackplate 6 inch Powered Set-back Model 450
SKU: 550450
Designed for outboards up to 550 lbs, the powerful electro-mechanical 5,000 pound thrust actuator responds immediately to the push button switch. |
|
|
| |
 |
|
Motor Bracket Model 435 |
Fixed Auxiliary Motor Bracket Model 435
SKU: 550435
This "fixed" Motor Bracket is designed for those rugged individuals who prefer to use their own strength to lift up their motors. It comes with the adjustable 13 in. setback feature and is made of 713 alloy aluminum. |
|
|
| |
 |
|
Motor Lift Model 35 |
Auxiliary Motor Lift Model 35 - 13" Setback
SKU: 550035
Make your day on the water just a bit more enjoyable with out straining your muscles trying to raise and lower the auxiliary motor. A simple convenience with major results. |
|
|
| |
 |
|
Motor Lift Model 35LE Ranger |
Auxiliary Motor Lift Model 35LE Ranger
SKU: 550350
The Auxiliary Motor Lift Model 35LE Ranger is the same rugged design as the powerful Model 35. The specially designed transom plate is made to fit the contoured transom of Ranger© and Lund© Pro V boats. |
|
|
| |
 |
|
Motor Link Adapter Kit -For Hydraulic Steering |
Motor Link Adapter Kit -For Hydraulic Steering
SKU: 555705
This kit is used specifically to adapt our steering Kits to your main engine hydraulic steering. |
|
|
| |
 |
|
Motor Mount Bolt Bar |
Motor Mount Bolt Bar
SKU: 559100
The Motor Mount Bolt Bar will supply the added support for your transom, when mounting your main or auxiliary motors. |
|
|
| |
 |
|
Outboard Motor Bracket Alum. 20hp |
Outboard Motor Bracket Alum. 20hp
SKU: 550021
The adjustable outboard motor bracket is designed for motors up to 20HP or 120 lbs max weight. |
|
|
| |
 |
|
Outboard Motor Bracket SS 10hp |
Outboard Motor Bracket SS 10hp
SKU: 550010
The Adjustable outboard motor bracket is designed for motors up to 10HP or 80lbs max weight. |
|
|
| |
 |
|
Outboard Motor Bracket SS 20hp |
Outboard Motor Bracket SS 20hp
SKU: 550020
The Adjustable outboard motor bracket is designed for motors up to 20HP or 120 lbs max weight. |
|
|
| |
 |
|
Over Roller Bracket adapter* |
Over Roller Bracket adapter*
SKU: 551950
The over roller bracket adapter is designed for use with the model 55-1900 transom saver. It is used on trailers that have rollers. |
|
|
| |
 |
|
Panther 100 Freshwater Electro Steer |
Electro Steer Remote Auxiliary Steering Model 100 Freshwater
SKU: 550100
Trolling Made Easy....Steer your kicker from anywhere in the boat. |
|
|
| |
 |
|
Panther 101 Saltwater Electro Steer |
Electro Steer Remote Auxiliary Steering Model 101 Saltwater
SKU: 550101
Trolling Made Easy....Steer your kicker from anywhere in the boat. |
|
|
| |
 |
|
Panther T4 - Through Tilt Tube Electro Steer - Freshwater |
Panther T4 - Through Tilt Tube Electro Steer - Freshwater
SKU: 550102
Allows you to steer your kicker motor from anywhere in the boat. |
|
|
| |
 |
|
Panther T4 - Through Tilt Tube Electro Steer - Saltwater |
Panther T4 - Through Tilt Tube Electro Steer -Saltwater
SKU: 550103
NEW! Allows you to steer your kicker motor from anywhere in the boat. |
|
|
| |
 |
|
Pro Strap Kicker Tie Down |
Pro Strap Kicker Tie Down
SKU: 551500
The Panther Pro-Strap provides hands-free, heavy duty retention for the Model 35. |
|
|
| |
 |
|
Push Button Trim Switch |
Push Button Trim Switch
SKU: 551200
12 feet of cable allows each user easy and custom installation of this remote push button switch. |
|
|
| |
 |
|
Reversible Wedge Plate Model 420 |
Wedge Plate 5 Degree Reversible Model 420
SKU: 550420
The Reversible Wedge Plate provides five degrees of trim or tuck. Its one piece, cast aluminum design provides a stable platform for the largest of today's outboards. |
|
|
| |
 |
|
Rope Cleat Black Nylon (3in) -2 Pack |
Rope Cleat Black Nylon (3in) -2 Pack
SKU: 558100
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8 in. diameter with no knots. |
|
|
| |
 |
|
Rope Cleat Die Cast Chrome Plated (3in) -2 Pack |
Rope Cleat Die Cast Chrome Plated (3in) -2 Pack
SKU: 558200
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8 in. diameter with no knots. |
|
|
| |
 |
|
Rope Cleat Die Cast Zinc Plated (3in) -2 Pack |
Rope Cleat Die Cast Zinc Plated (3in) -2 Pack
SKU: 558400
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8 in. diameter with no knots. |
|
|
| |
 |
|
Saltwater Anode Kit |
Saltwater Anode Kit
SKU: 559000
This sacrificial anode provides protection for all Panther Trim & Tilts when used in salt or brackish water. |
|
|
| |
 |
|
Set-back Plate Model 220 (2in) |
Set-back Plate Model 220 (2in)
SKU: 550220
This cast aluminum spacer provides two inches of set-back for bolt-on motors, allowing performance seekers to fine tune their boats |
|
|
| |
 |
|
Set-back Plate Model 240 (4in) |
Set-back Plate Model 240 (4in)
SKU: 550240
An innovative flared shape allows this four inch set-back bracket more transom contact area to reduce stress and improve the motorís stability. |
|
|
| |
 |
|
Shore Spike - Stainless Steel |
Shore Spike - Stainless Steel
SKU: 559600
Make quick work of anchoring your boat to the shore. |
|
|
| |
 |
|
Shore Spike - Zinc Plated |
Shore Spike - Zinc Plated
SKU: 559500
Make quick work of anchoring your boat to the shore. |
|
|
| |
 |
|
Spacer Kit for Model 35 Lift and 435 Bracket |
Spacer Kit for Model 35 Lift and 435 Bracket -3 inch
SKU: 559035
This two piece, cast aluminum spacer provides an extra three inches of setback for the Model 35. |
|
|
| |
 |
|
Static Motor Mount Plate Model 405 |
Static Motor Mount Plate Model 405
SKU: 550405
If trolling motors are you thing – then our 405 static Plate is a must. It offers a sturdy and flat mounting area for your trolling motor clamps. Troll with confidence knowing that your trolling motor will stay where you put it!! |
|
|
| |
 |
|
Trim and Tilt - Model 40 Weekender Series |
Trim and Tilt - Model 40
SKU: 550040
NEW! The Model 40 is a heavy duty fabricated aluminum bracket. It will hold 2 and 4 strokes motors up to 150lbs. |
|
|
| |
 |
|
Trim and Tilt Model 135 |
Trim and Tilt Model 135
SKU: 550135
For outboards up to 135hp or 350 pounds, the Heavy Duty Trim & Tilt maximizes lifting power (even greater than the outboard's tilt range). It also allows for increased tuck-under to get heavy boats on plane quickly. |
|
|
| |
 |
|
Trim and Tilt Model 55 |
Trim and Tilt Model 55
SKU: 550055
Make your day on the water just a bit more enjoyable with out straining your muscles trying to raise and lower an outboard motor that is not equipped with trim and tilt. A simple convenience with major results. |
|
|
| |
 |
|
Universal Lift Gauge |
Universal Lift Gauge
SKU: 551100
This unit is truly universal and will fit any JackPlate or trim and tilt unit, providing accurate indication of the trim or tilt that is occurring. |
|
|
| |
 |
|
WaterSpike Anchor System 9200 |
WaterSpike Anchor System 9200
SKU: 559200
New! The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. |
|
|
| |
 |
|
WaterSpike Anchor System 9300 |
WaterSpike Anchor System 9300
SKU: 559300
New! The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. |
|
|
| |
 |
|
WaterSpike Anchor System 9400 |
WaterSpike Anchor System 9400
SKU: 559400
New! The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. |
|
|
| |
 |
|
Wireless Remote Control |
Wireless Remote Control
SKU: 550105
NEW! Adapted for “all” Panther Steering and Trim & Tilt units ever made. |
|
|
|
|
|
|
|
| |
